Pipeline: AWS Steps

Gitpod ready-to-code Build Status

Features

This plugins adds Jenkins pipeline steps to interact with the AWS API.

see the changelog for release information

Primary/Agent setups

This plugin is not optimized to setups with a primary and multiple agents. Only steps that touch the workspace are executed on the agents while the rest is executed on the master.

For the best experience make sure that primary and agents have the same IAM permission and networking capabilities.

Retrieve credentials from node

By default, credentials lookup is done on the master node for all steps. To enable credentials lookup on the current node, enable Retrieve credentials from node in Jenkins global configuration. This is globally applicable and restricts all access to the master's credentials.

Usage / Steps

withAWS

the withAWS step provides authorization for the nested steps. You can provide region and profile information or let Jenkins assume a role in another or the same AWS account. You can mix all parameters in one withAWS block.

Set region information (note that region and endpointUrl are mutually exclusive):

withAWS(region:'eu-west-1') {
    // do something
}

Use provided endpointUrl (endpointUrl is optional, however, region and endpointUrl are mutually exclusive):

withAWS(endpointUrl:'https://minio.mycompany.com',credentials:'nameOfSystemCredentials',federatedUserId:"${submitter}@${releaseVersion}") {
    // do something
}

Use Jenkins UsernamePassword credentials information (Username: AccessKeyId, Password: SecretAccessKey):

withAWS(credentials:'IDofSystemCredentials') {
    // do something
}

Use Jenkins AWS credentials information (AWS Access Key: AccessKeyId, AWS Secret Key: SecretAccessKey):

withAWS(credentials:'IDofAwsCredentials') {
    // do something
}

Use profile information from ~/.aws/config:

withAWS(profile:'myProfile') {
    // do something
}

Assume role information (account is optional - uses current account as default. externalId, roleSessionName and policy are optional. duration is optional - if specified it represents the maximum amount of time in seconds the session may persist for, defaults to 3600.):

withAWS(role:'admin', roleAccount:'123456789012', externalId: 'my-external-id', policy: '{"Version":"2012-10-17","Statement":[{"Sid":"Stmt1","Effect":"Deny","Action":"s3:DeleteObject","Resource":"*"}]}', duration: 3600, roleSessionName: 'my-custom-session-name') {
    // do something
}

Assume federated user id information (federatedUserId is optional - if specified it generates a set of temporary credentials and allows you to push a federated user id into cloud trail for auditing. duration is optional - if specified it represents the maximum amount of time in seconds the session may persist for, defaults to 3600.):

withAWS(region:'eu-central-1',credentials:'nameOfSystemCredentials',federatedUserId:"${submitter}@${releaseVersion}", duration: 3600) {
    // do something
}

Authentication with a SAML assertion (fetched from your company IdP) by assuming a role

withAWS(role: 'myRole', roleAccount: '123456789', principalArn: 'arn:aws:iam::123456789:saml-provider/test', samlAssertion: 'base64SAML', region:'eu-west-1') {
  // do something
}

Authentication by retrieving credentials from the node in scope

node('myNode') { // Credentials will be fetched from this node
  withAWS(role: 'myRole', roleAccount: '123456789', region:'eu-west-1', useNode: true) {
    // do something
  }
}

When you use Jenkins Declarative Pipelines you can also use withAWS in an options block:

options {
	withAWS(profile:'myProfile')
}
stages {
	...
}

awsIdentity

Print current AWS identity information to the log.

The step returns an objects with the following fields:

  • account - The AWS account ID number of the account that owns or contains the calling entity
  • user - The unique identifier of the calling entity
  • arn - The AWS ARN associated with the calling entity
def identity = awsIdentity()

cfInvalidate

Invalidate given paths in CloudFront distribution.

cfInvalidate(distribution:'someDistributionId', paths:['/*'])
cfInvalidate(distribution:'someDistributionId', paths:['/*'], waitForCompletion: true)

S3 Steps

All s3* steps take an optional pathStyleAccessEnabled and payloadSigningEnabled boolean parameter.

s3Upload(pathStyleAccessEnabled: true, payloadSigningEnabled: true, file:'file.txt', bucket:'my-bucket', path:'path/to/target/file.txt')
s3Copy(pathStyleAccessEnabled: true, fromBucket:'my-bucket', fromPath:'path/to/source/file.txt', toBucket:'other-bucket', toPath:'path/to/destination/file.txt')
s3Delete(pathStyleAccessEnabled: true, bucket:'my-bucket', path:'path/to/source/file.txt')
s3Download(pathStyleAccessEnabled: true, file:'file.txt', bucket:'my-bucket', path:'path/to/source/file.txt', force:true)
exists = s3DoesObjectExist(pathStyleAccessEnabled: true, bucket:'my-bucket', path:'path/to/source/file.txt')
files = s3FindFiles(pathStyleAccessEnabled: true, bucket:'my-bucket')

s3Upload

Upload a file/folder from the workspace (or a String) to an S3 bucket. If the file parameter denotes a directory, the complete directory including all subfolders will be uploaded.

s3Upload(file:'file.txt', bucket:'my-bucket', path:'path/to/target/file.txt')
s3Upload(file:'someFolder', bucket:'my-bucket', path:'path/to/targetFolder/')

Another way to use it is with include/exclude patterns which are applied in the specified subdirectory (workingDir). The option accepts a comma-separated list of patterns.

s3Upload(bucket:"my-bucket", path:'path/to/targetFolder/', includePathPattern:'**/*', workingDir:'dist', excludePathPattern:'**/*.svg,**/*.jpg')

Specific user metadatas can be added to uploaded files

s3Upload(bucket:"my-bucket", path:'path/to/targetFolder/', includePathPattern:'**/*.svg', workingDir:'dist', metadatas:['Key:SomeValue','Another:Value'])

Specific cachecontrol can be added to uploaded files

s3Upload(bucket:"my-bucket", path:'path/to/targetFolder/', includePathPattern:'**/*.svg', workingDir:'dist', cacheControl:'public,max-age=31536000')

Specific content encoding can be added to uploaded files

s3Upload(file:'file.txt', bucket:'my-bucket', contentEncoding: 'gzip')

Specific content type can be added to uploaded files

s3Upload(bucket:"my-bucket", path:'path/to/targetFolder/', includePathPattern:'**/*.ttf', workingDir:'dist', contentType:'application/x-font-ttf', contentDisposition:'attachment')

Canned ACLs can be added to upload requests.

s3Upload(file:'file.txt', bucket:'my-bucket', path:'path/to/target/file.txt', acl:'PublicRead')
s3Upload(file:'someFolder', bucket:'my-bucket', path:'path/to/targetFolder/', acl:'BucketOwnerFullControl')

A Server Side Encryption Algorithm can be added to upload requests.

s3Upload(file:'file.txt', bucket:'my-bucket', path:'path/to/target/file.txt', sseAlgorithm:'AES256')

A KMS alias or KMS id can be used to encrypt the uploaded file or directory at rest.

s3Upload(file: 'foo.txt', bucket: 'my-bucket', path: 'path/to/target/file.txt', kmsId: 'alias/foo')
s3Upload(file: 'foo.txt', bucket: 'my-bucket', path: 'path/to/target/file.txt', kmsId: '8e1d420d-bf94-4a15-a07a-8ad965abb30f')
s3upload(file: 'bar-dir', bucket: 'my-bucket', path: 'path/to/target', kmsId: 'alias/bar')

A redirect location can be added to uploaded files.

s3Upload(file: 'file.txt', bucket: 'my-bucket', redirectLocation: '/redirect')

Creating an S3 object by creating the file whose contents is the provided text argument.

s3Upload(path: 'file.txt', bucket: 'my-bucket', text: 'Some Text Content')
s3Upload(path: 'path/to/targetFolder/file.txt', bucket: 'my-bucket', text: 'Some Text Content')

Tags can be added to uploaded files.

s3Upload(file: 'file.txt', bucket: 'my-bucket', tags: '[tag1:value1, tag2:value2]')

def tags=[:]
tags["tag1"]="value1"
tags["tag2"]="value2"

s3Upload(file: 'file.txt', bucket: 'my-bucket', tags: tags.toString())

Log messages can be less verbose. Disable it when you feel the logs are excessive but you will lose the visibility of what files having been uploaded to S3.

s3Upload(path: 'source/path/', bucket: 'my-bucket', verbose: false)

s3Download

Download a file/folder from S3 to the local workspace. Set optional parameter force to true to overwrite existing file in workspace. If the path ends with a / the complete virtual directory will be downloaded.

s3Download(file:'file.txt', bucket:'my-bucket', path:'path/to/source/file.txt', force:true)
s3Download(file:'targetFolder/', bucket:'my-bucket', path:'path/to/sourceFolder/', force:true)

s3Copy

Copy file between S3 buckets.

s3Copy(fromBucket:'my-bucket', fromPath:'path/to/source/file.txt', toBucket:'other-bucket', toPath:'path/to/destination/file.txt')

s3Delete

Delete a file/folder from S3. If the path ends in a "/", then the path will be interpreted to be a folder, and all of its contents will be removed.

s3Delete(bucket:'my-bucket', path:'path/to/source/file.txt')
s3Delete(bucket:'my-bucket', path:'path/to/sourceFolder/')

s3DoesObjectExist

Check if object exists in S3 bucket.

exists = s3DoesObjectExist(bucket:'my-bucket', path:'path/to/source/file.txt')

s3FindFiles

This provides a way to query the files/folders in the S3 bucket, analogous to the findFiles step provided by "pipeline-utility-steps-plugin". If specified, the path limits the scope of the operation to that folder only. The glob parameter tells s3FindFiles what to look for. This can be a file name, a full path to a file, or a standard glob ("*", "*.ext", "path/**/file.ext", etc.).

If you do not specify path, then it will default to the root of the bucket. The path is assumed to be a folder; you do not need to end it with a "/", but it is okay if you do. The path property of the results will be relative to this value.

This works by enumerating every file/folder in the S3 bucket under path and then performing glob matching. When possible, you should use path to limit the search space for efficiency purposes.

If you do not specify glob, then it will default to "*".

By default, this will return both files and folders. To only return files, set the onlyFiles parameter to true.

files = s3FindFiles(bucket:'my-bucket')
files = s3FindFiles(bucket:'my-bucket', glob:'path/to/targetFolder/file.ext')
files = s3FindFiles(bucket:'my-bucket', path:'path/to/targetFolder/', glob:'file.ext')
files = s3FindFiles(bucket:'my-bucket', path:'path/to/targetFolder/', glob:'*.ext')
files = s3FindFiles(bucket:'my-bucket', path:'path/', glob:'**/file.ext')

s3FindFiles returns an array of FileWrapper objects exactly identical to those returned by findFiles.

Each FileWrapper object has the following properties:

  • name: the filename portion of the path (for "path/to/my/file.ext", this would be "file.ext")
  • path: the full path of the file, relative to the path specified (for path="path/to/", this property of the file "path/to/my/file.ext" would be "my/file.ext")
  • directory: true if this is a directory; false otherwise
  • length: the length of the file (this is always "0" for directories)
  • lastModified: the last modification timestamp, in milliseconds since the Unix epoch (this is always "0" for directories)

When used in a string context, a FileWrapper object returns the value of its path property.

s3PresignURL

Will presign the bucket/key and return a url. Defaults to 1 minute duration, using GET.

def url = s3PresignURL(bucket: 'mybucket', key: 'mykey')

The duration can be overridden:

def url = s3PresignURL(bucket: 'mybucket', key: 'mykey', durationInSeconds: 300) //5 minutes

The method can also be overridden:

def url = s3PresignURL(bucket: 'mybucket', key: 'mykey', httpMethod: 'POST')

cfnValidate

Validates the given CloudFormation template.

def response = cfnValidate(file:'template.yaml')
echo "template description: ${response.description}"

cfnUpdate

Create or update the given CloudFormation stack using the given template from the workspace. You can specify an optional list of parameters, either as a key/value pair or a map. You can also specify a list of keepParams of parameters which will use the previous value on stack updates.

Using timeoutInMinutes you can specify the amount of time that can pass before the stack status becomes CREATE_FAILED and the stack gets rolled back. Due to limitations in the AWS API, this only applies to stack creation.

If you have many parameters you can specify a paramsFile containing the parameters. The format is either a standard JSON file like with the cli or a YAML file for the cfn-params command line utility.

Additionally you can specify a list of tags that are set on the stack and all resources created by CloudFormation.

The step returns the outputs of the stack as a map. It also contains special values prefixed with jenkins:

  • jenkinsStackUpdateStatus - "true"/"false" whether the stack was modified or not

When cfnUpdate creates a stack and the creation fails, the stack is deleted instead of being left in a broken state.

To prevent running into rate limiting on the AWS API you can change the default polling interval of 1000 ms using the parameter pollIntervall. Using the value 0 disables event printing.

def outputs = cfnUpdate(stack:'my-stack', file:'template.yaml', params:['InstanceType=t2.nano'], keepParams:['Version'], timeoutInMinutes:10, tags:['TagName=Value'], notificationARNs:['arn:aws:sns:us-east-1:993852309656:topic'], pollInterval:1000)

or the parameters can be specified as a map:

def outputs = cfnUpdate(stack:'my-stack', file:'template.yaml', params:['InstanceType': 't2.nano'], keepParams:['Version'], timeoutInMinutes:10, tags:['TagName=Value'], notificationARNs:['arn:aws:sns:us-east-1:993852309656:topic'], pollInterval:1000)

Alternatively, you can specify a URL to a template on S3 (you'll need this if you hit the 51200 byte limit on template):

def outputs = cfnUpdate(stack:'my-stack', url:'https://s3.amazonaws.com/my-templates-bucket/template.yaml')

By default the cfnUpdate step creates a new stack if the specified stack does not exist, this behaviour can be overridden by passing create: 'false' as parameter :

def outputs = cfnUpdate(stack:'my-stack', url:'https://s3.amazonaws.com/my-templates-bucket/template.yaml', create: 'false')

In above example if my-stack already exists it would be updated and if it doesnt exist no actions would be performed.

In a case where CloudFormation needs to use a different IAM Role for creating the stack than the one currently in effect, you can pass the complete Role ARN to be used as roleArn parameter. i.e:

def outputs = cfnUpdate(stack:'my-stack', url:'https://s3.amazonaws.com/my-templates-bucket/template.yaml', roleArn: 'arn:aws:iam::123456789012:role/S3Access')

It's possible to override the behaviour of a stack when the creation fails by using "onFailure". Allowed values are DO_NOTHING, ROLLBACK, or DELETE Because the normal default value of ROLLBACK behaves strangely in a CI/CD environment. cfnUpdate uses DELETE as default.

def outputs = cfnUpdate(stack:'my-stack', url:'https://s3.amazonaws.com/my-templates-bucket/template.yaml', onFailure:'DELETE')

You can specify rollback triggers for the stack update:

def outputs = cfnUpdate(stack:'my-stack', url:'https://s3.amazonaws.com/my-templates-bucket/template.yaml', rollbackTimeoutInMinutes: 10, rollbackTriggers: ['AWS::CloudWatch::Alarm=arn:of:cloudwatch:alarm'])

When creating a stack, you can activate termination protection by using the enableTerminationProtection field:

def outputs = cfnUpdate(stack:'my-stack', url:'https://s3.amazonaws.com/my-templates-bucket/template.yaml', enableTerminationProtection: true)

Note: When creating a stack, either file or url are required. When updating it, omitting both parameters will keep the stack's current template.

cfnDelete

Remove the given stack from CloudFormation.

To prevent running into rate limiting on the AWS API you can change the default polling interval of 1000 ms using the parameter pollIntervall. Using the value 0 disables event printing.

Note: When deleting a stack only 'stack' parameter is required.

cfnDelete(stack:'my-stack', pollInterval:1000, retainResources :['mylogicalid'], roleArn: 'my-arn', clientRequestToken: 'my-request-token')

cfnDescribe

The step returns the outputs of the stack as map.

def outputs = cfnDescribe(stack:'my-stack')

cfnExports

The step returns the global CloudFormation exports as map.

def globalExports = cfnExports()

cfnCreateChangeSet

Create a change set to update the given CloudFormation stack using the given template from the workspace. You can specify an optional list of parameters, either as a key/value pair or a map. You can also specify a list of keepParams of parameters which will use the previous value on stack updates.

If you have many parameters you can specify a paramsFile containing the parameters. The format is either a standard JSON file like with the cli or a YAML file for the cfn-params command line utility.

Additionally you can specify a list of tags that are set on the stack and all resources created by CloudFormation.

The step returns the outputs of the stack as a map. It also contains special values prefixed with jenkins:

  • jenkinsStackUpdateStatus - "true"/"false" whether the stack was modified or not

To prevent running into rate limiting on the AWS API you can change the default polling interval of 1000 ms using the parameter pollIntervall. Using the value 0 disables event printing.

cfnCreateChangeSet(stack:'my-stack', changeSet:'my-change-set', file:'template.yaml', params:['InstanceType=t2.nano'], keepParams:['Version'], tags:['TagName=Value'], notificationARNs:['arn:aws:sns:us-east-1:993852309656:topic'], pollInterval:1000)

or the parameters can be specified as a map:

cfnCreateChangeSet(stack:'my-stack', changeSet:'my-change-set', file:'template.yaml', params:['InstanceType': 't2.nano'], keepParams:['Version'], tags:['TagName=Value'], notificationARNs:['arn:aws:sns:us-east-1:993852309656:topic'], pollInterval:1000)

Alternatively, you can specify a URL to a template on S3 (you'll need this if you hit the 51200 byte limit on template):

cfnCreateChangeSet(stack:'my-stack', changeSet:'my-change-set', url:'https://s3.amazonaws.com/my-templates-bucket/template.yaml')

or specify a raw template:

cfnCreateChangeSet(stack:'my-stack', changeSet:'my-change-set', template: 'my template body')

By default the cfnCreateChangeSet step creates a change set for creating a new stack if the specified stack does not exist, this behaviour can be overridden by passing create: 'false' as parameter :

cfnCreateChangeSet(stack:'my-stack', changeSet:'my-change-set', url:'https://s3.amazonaws.com/my-templates-bucket/template.yaml', create: 'false')

In above example if my-stack already exists, a change set stack with change set will be created, and if it doesnt exist no actions would be performed.

In a case where CloudFormation needs to use a different IAM Role for creating or updating the stack than the one currently in effect, you can pass the complete Role ARN to be used as roleArn parameter. i.e:

cfnCreateChangeSet(stack:'my-stack', changeSet:'my-change-set', url:'https://s3.amazonaws.com/my-templates-bucket/template.yaml', roleArn: 'arn:aws:iam::123456789012:role/S3Access')

You can specify rollback triggers for the stack update:

cfnCreateChangeSet(stack:'my-stack', changeSet:'my-change-set', url:'https://s3.amazonaws.com/my-templates-bucket/template.yaml', rollbackTimeoutInMinutes: 10, rollbackTriggers: ['AWS::CloudWatch::Alarm=arn:of:cloudwatch:alarm'])

Note: When creating a change set for a non-existing stack, either file or url are required. When updating it, omitting both parameters will keep the stack's current template.

cfnExecuteChangeSet

Execute a previously created change set to create or update a CloudFormation stack. All the necessary information, like parameters and tags, were provided earlier when the change set was created.

To prevent running into rate limiting on the AWS API you can change the default polling interval of 1000 ms using the parameter pollIntervall. Using the value 0 disables event printing.

def outputs = cfnExecuteChangeSet(stack:'my-stack', changeSet:'my-change-set', pollInterval:1000)

cfnUpdateStackSet

Create a stack set. Similar options to cfnUpdate. Will monitor the resulting StackSet operation and will fail the build step if the operation does not complete successfully.

To prevent running into rate limiting on the AWS API you can change the default polling interval of 1000 ms using the parameter pollIntervall. Using the value 0 disables event printing.

  cfnUpdateStackSet(stackSet:'myStackSet', url:'https://s3.amazonaws.com/my-templates-bucket/template.yaml')

To set a custom administrator role ARN:

  cfnUpdateStackSet(stackSet:'myStackSet', url:'https://s3.amazonaws.com/my-templates-bucket/template.yaml', administratorRoleArn: 'mycustomarn')

To set a operation preferences:

  cfnUpdateStackSet(stackSet:'myStackSet', url:'https://s3.amazonaws.com/my-templates-bucket/template.yaml', operationPreferences: [failureToleranceCount: 5])

When the stack set gets really big, the recommendation from AWS is to batch the update requests. This option is not part of the AWS API, but is an implementation to facilitate updating a large stack set. To automatically batch via region (find all stack instances, group them by region, and submit each region separately): (

  cfnUpdateStackSet(stackSet:'myStackSet', url:'https://s3.amazonaws.com/my-templates-bucket/template.yaml', batchingOptions: [regions: true])

cfnDeleteStackSet

Deletes a stack set.

To prevent running into rate limiting on the AWS API you can change the default polling interval of 1000 ms using the parameter pollIntervall. Using the value 0 disables event printing.

  cfnDeleteStackSet(stackSet:'myStackSet')

snsPublish

Publishes a message to SNS. Note that the optional parameter messageAttributes is assuming string only values.

snsPublish(topicArn:'arn:aws:sns:us-east-1:123456789012:MyNewTopic', subject:'my subject', message:'this is your message', messageAttributes: ['k1': 'v1', 'k2': 'v2'])

deployAPI

Deploys an API Gateway definition to a stage.

deployAPI(api:'myApiId', stage:'Prod')

Additionally you can specify a description and stage variables.

deployAPI(api:'myApiId', stage:'Prod', description:"Build: ${env.BUILD_ID}", variables:['key=value'])

createDeployment

Deploys an application revision through the specified deployment group (AWS CodeDeploy)

From S3 bucket:

createDeployment(
        s3Bucket: 'jenkins.bucket',
        s3Key: 'artifacts/SimpleWebApp.zip',
        s3BundleType: 'zip', // [Valid values: tar | tgz | zip | YAML | JSON]
        applicationName: 'SampleWebApp',
        deploymentGroupName: 'SampleDeploymentGroup',
        deploymentConfigName: 'CodeDeployDefault.AllAtOnce',
        description: 'Test deploy',
        waitForCompletion: 'true',
        //Optional values 
        ignoreApplicationStopFailures: 'false',
        fileExistsBehavior: 'OVERWRITE'// [Valid values: DISALLOW, OVERWRITE, RETAIN]
)

From GitHub:

createDeployment(
        gitHubRepository: 'MykhayloGnylorybov/AwsCodeDeployArtifact',
        gitHubCommitId: 'e9ee742f44c9a0f97ee3aa94593e7b6aad6e2d14',
        applicationName: 'SampleWebApp',
        deploymentGroupName: 'SampleDeploymentGroup',
        deploymentConfigName: 'CodeDeployDefault.AllAtOnce',
        description: 'Test deploy',
        waitForCompletion: 'true'
)

awaitDeploymentCompletion

Awaits for a CodeDeploy deployment to complete.

The step runs within the withAWS block and requires only one parameter:

  • deploymentId (the AWS CodeDeploy deployment id: e.g. 'd-3GR0HQLDN')

Simple await:

awaitDeploymentCompletion('d-3GR0HQLDN')

Timed await:

timeout(time: 15, unit: 'MINUTES'){
    awaitDeploymentCompletion('d-3GR0HQLDN')
}

listAWSAccounts

Retrieves the list of all AWS accounts of the organization. This step can only be run in the master account.

The step returns an array of Account objects with the following fields:

  • id - the account id
  • arn - the organizations ARN
  • name - the account name
  • safeName - the name converted to only contain lower-case, numbers and hyphens
  • status - the account status
def accounts = listAWSAccounts()

You can specify a parent id (Root, Orga unit) with the optional parameter parent

def accounts = listAWSAccounts('ou-1234-12345678')

updateIdP

Create or update a SAML identity provider with the given metadata document.

The step returns the ARN of the created identity provider.

def idp = updateIdP(name: 'nameToCreateOrUpdate', metadata: 'pathToMetadataFile')

updateTrustPolicy

Update the assume role trust policy of the given role using the provided file.

updateTrustPolicy(roleName: 'SomeRole', policyFile: 'path/to/somefile.json')

setAccountAlias

Create or update the AWS account alias.

setAccountAlias(name: 'awsAlias')

ecrDeleteImages

Delete images in a repository.

ecrDeleteImages(repositoryName: 'foo', imageIds: ['imageDigest': 'digest', 'imageTag': 'tag'])

ecrListImages

List images in a repository.

def images = ecrListImages(repositoryName: 'foo')

ecrLogin

Create login string to authenticate docker with the ECR.

The step returns the shell command to perform the login.

def login = ecrLogin()

For older versions of docker that need the email parameter use:

def login = ecrLogin(email:true)

It's also possible to specify AWS accounts to perform ECR login into:

def login = ecrLogin(registryIds: ['123456789', '987654321'])

ecrSetRepositoryPolicy

Sets the json policy document containing ECR permissions.

  • registryId - The AWS account ID associated with the registry that contains the repository.
  • repositoryName - The name of the repository to receive the policy.
  • policyText - The JSON repository policy text to apply to the repository. For more information, see Amazon ECR Repository Policy Examples in the Amazon Elastic Container Registry User Guide.

The step returns the object returned by the command.

  • Note - make sure you set the correct region in the credentials in order to find the repository
def result = ecrSetRepositoryPolicy(registryId: 'my-registryId',
                                     repositoryName: 'my-repositoryName',
                                     policyText: 'json-policyText'
)
def policyFile ="${env.WORKSPACE}/policyText.json"
def policyText = readFile file: policyFile
def result = ecrSetRepositoryPolicy(registryId: 'my-registryId',
                                     repositoryName: 'my-repositoryName',
                                     policyText: policyText
)

invokeLambda

Invoke a Lambda function.

The step returns the object returned by the Lambda.

def result = invokeLambda(
	functionName: 'myLambdaFunction',
	payload: [ "key": "value", "anotherkey" : [ "another", "value"] ]
)

Alternatively payload and return value can be Strings instead of Objects:

String result = invokeLambda(
	functionName: 'myLambdaFunction',
	payloadAsString: '{"key": "value"}',
	returnValueAsString: true
)

lambdaVersionCleanup

Cleans up lambda function versions older than the daysAgo flag. The main use case around this is for tooling like AWS Serverless Application Model. It creates lambda functions, but marks them as DeletionPolicy: Retain so the versions are never deleted. Overtime, these unused versions will accumulate and the account/region might hit the limit for maximum storage of lambda functions.

lambdaVersionCleanup(
	functionName: 'myLambdaFunction',
	daysAgo: 14
)

To discover and delete all old versions of functions created by a AWS CloudFormation stack:

lambdaVersionCleanup(
	stackName: 'myStack',
	daysAgo: 14
)

ec2ShareAmi

Share an AMI image to one or more accounts

ec2ShareAmi(
    amiId: 'ami-23842',
    accountIds: [ "0123456789", "1234567890" ]
)

elbRegisterInstance

Registers a target to a Target Group.

elbRegisterInstance(
    targetGroupARN: 'arn:aws:elasticloadbalancing:us-west-2:123456789:targetgroup/my-load-balancer/123456789',
    instanceID: 'i-myid',
    port: 8080
)

elbDeregisterInstance

Deregisters a target from a Target Group.

elbDeregisterInstance(
    targetGroupARN: 'arn:aws:elasticloadbalancing:us-west-2:123456789:targetgroup/my-load-balancer/123456789',
    instanceID: 'i-myid',
    port: 8080
)

elbIsInstanceRegistered

Check if target has registered and healthy.

The step returns true or false.

elbIsInstanceRegistered(
    targetGroupARN: 'arn:aws:elasticloadbalancing:us-west-2:123456789:targetgroup/my-load-balancer/123456789',
    instanceID: 'i-myid',
    port: 8080
)

elbIsInstanceDeregistered

Check if target has completed removed from the Target Group.

The step returns true or false.

elbIsInstanceDeregistered(
    targetGroupARN: 'arn:aws:elasticloadbalancing:us-west-2:123456789:targetgroup/my-load-balancer/123456789',
    instanceID: 'i-myid',
    port: 8080
)

ebCreateApplication

Creates a new Elastic Beanstalk application.

Arguments:

  • applicationName (Required) - Name of the application to be created
  • description - Descriptive text to add to the application

AWS reference

ebCreateApplication(
    applicatName: "my-application",
    description: "My first application"
)

ebCreateApplicationVersion

Creates a new deployable version for an existing Elastic Beanstalk application. This version created is based on files uploaded to an S3 bucket, that are used to create a deployable version of the application. This version label can be used to deploy a new environment.

Arguments:

  • applicationName (Required) - Name of the application where the new version should be created
  • versionLabel (Required) - Name of the version to be created
  • s3Bucket (Required) - Name of the S3 Bucket where the source code / executable of this version exists
  • s3Key: (Required) - Path in the S3 Bucket where the source code / executable of this version exists
  • description - Descriptive text of the application version

AWS reference

ebCreateApplicationVersion(
    applicationName: "my-application",
    versionLabel: "my-application-1.0.0",
    s3Bucket: "my-bucket",
    s3Key: "my-application.jar",
    description: "My first application version"
)

ebCreateConfigurationTemplate

Creates a new deployable version for an existing Elastic Beanstalk application. This version created is based on files uploaded to an S3 bucket, that are used to create a deployable version of the application. This version label can be used to deploy a new environment.

Arguments:

  • applicationName (Required) - Name of the application where the new configuration template should be created
  • templateName (Required) - Name of the configuration template to be created
  • environmentId - Id of the environment to use as a source for the new configuration template. Required if no solutionStackName or sourceConfiguration are provided
  • solutionStackName - Solution stack string for the new configuration template. List of supported platforms can be seen in AWS. Required if no environmentId or sourceConfiguration are provided
  • sourceConfigurationApplication - Name of the application that has the source configuration to copy over. Should be used in conjunction with sourceConfigurationTemplate. Required if no environmentId or solutionStackName are provided
  • sourceConfigurationTemplate - Name of the configuration to be used as a source for the new configuration template. Should be used in conjunction with sourceConfigurationApplication. Required if no environmentId or solutionStackName are provided
  • description - Descriptive text of the application configuration template

AWS reference

// Create configuration template based on existing environment
ebCreateConfigurationTemplate(
    applicationName: "my-application",
    templateName: "my-application-production-template",
    environmentId: "my-application-production",
    description: "Configuration template for the production environment of my application"
)

// Create configuration template based on a solution stack
ebCreateConfigurationTemplate(
    applicationName: "my-application",
    templateName: "my-application-production-template",
    solutionStackName: "64bit Amazon Linux 2018.03 v3.3.9 running Tomcat 8.5 Java 8",
    description: "Configuration template for the production environment of my application"
)

// Create configuration template based on an existing configuration template
ebCreateConfigurationTemplate(
    applicationName: "my-application",
    templateName: "my-application-production-template",
    sourceConfigurationApplication: "my-other-application",
    sourceConfigurationTemplate: "my-other-application-production-template",
    description: "Configuration template for the production environment of my application"
)

ebCreateEnvironment

Creates a new environment for an existing Elastic Beanstalk application. This environment can be created based on existing configuration templates and application versions for that application.

Arguments:

  • applicationName (Required) - Name of the application where the new environment should be created
  • environmentName (Required) - Name of the environment to be created
  • templateName - Name of the configuration template to use with the environment to be created. Mutually exclusive with solutionStackName
  • solutionStackName - Solution stack string for the new environment. List of supported platforms can be seen in AWS. Mutually exclusive with templateName
  • versionLabel - Name of the application version to be deployed in the new environment
  • updateOnExisting - If set to false the command will throw an exception if the environment already exists. Otherwise, in case the environment already exists, it will be updated. Defaults to true
  • description - Descriptive text of the environment

AWS reference

// Create environment from existing configuration template
ebCreateEnvironment(
    applicationName: "my-application",
    environmentName: "production",
    templateName: "my-application-production-template",
    versionLabel: "my-application-1.0.0",
    description: "Production environment of my application"
)

// Create environment with no configuration template, using a Supported Platform string
ebCreateEnvironment(
    applicationName: "my-application",
    environmentName: "production",
    solutionStackName: "64bit Amazon Linux 2018.03 v3.3.9 running Tomcat 8.5 Java 8",
    versionLabel: "my-application-1.0.0",
    description: "Production environment of my application"
)

ebSwapEnvironmentCNAMEs

Swaps the CNAMEs of the environments. This is useful for Blue-Green deployments.

Arguments:

  • sourceEnvironmentId - Id of the source environment. Should be used with destinationEnvironmentId
  • sourceEnvironmentName - Name of the source environment. Should be used with destinationEnvironmentName
  • sourceEnvironmentCNAME - CNAME of the source environment. If provided, it will be used to lookup the id and name of the source environment.
  • destinationEnvironmentId - Id of the destination environment. Should be used with sourceEnvironmentId
  • destinationEnvironmentName - Name of the destination environment. Should be used with sourceEnvironmentName
  • destinationEnvironmentCNAME - CNAME of the destunatuin environment. If provided, it will be used to lookup the id and name of the destination environment.

AWS reference

// Swap CNAMEs using Ids
ebSwapEnvironmentCNAMEs(
    sourceEnvironmentId: "e-65abcdefgh",
    destinationEnvironmentId: "e-66zxcvbdg"
)

// Swap CNAMEs using the environment names
ebCreateEnvironment(
    sourceEnvironmentName: "production",
    destinationEnvironmentName: "production-2"
)

// Swap CNAMEs using the source environment name and destination environment CNAME
ebCreateEnvironment(
        sourceEnvironmentName: "green",
        destinationEnvironmentCNAME: "production.eu-west-1.elasticbeanstalk.com"
)

ebWaitOnEnvironmentStatus

Waits for environment to be in the specified status.

This can be used to ensure that the environment is ready to accept commands, like an update, or a termination command. Be aware this does not guarantee that the application has finished starting up. If an application has a long startup time, the environment will be ready for new commands before the application has finished the boot.

Arguments:

  • applicationName - Name of the application of that environment
  • environmentName - Name of the environment
  • status - Status to wait for. Valid values: Launching | Updating | Ready | Terminating | Terminated. Defaults to Ready
// Wait for environment to be ready for new commands
ebWaitOnEnvironmentStatus(
    applicationName: "my-application",
    environmentName: "production"
)

// Wait for environment to be terminated
ebWaitOnEnvironmentStatus(
    applicationName: "my-application",
    environmentName: "temporary",
    status: "Terminated"
)

ebWaitOnEnvironmentHealth

Waits for environment to reach the desired health status, and remain there for a minimum amount of time.

This can be used to ensure that the environment has finished the startup process, and that the web application is ready and available.

Arguments:

  • applicationName (Required) - Name of the application of that environment
  • environmentName (Required) - Name of the environment
  • health - Health status to wait for. Valid values: Green | Yellow | Red | Grey. Defaults to Green
  • stabilityThreshold - Amount of time (in seconds) to wait before considering the status stable. Can be disabled by setting it to 0. Defaults to 60
// Wait for environment health to be green for at least 1 minute
ebWaitOnEnvironmentHealth(
    applicationName: "my-application",
    environmentName: "production"
)

// Detect immediately if environment becomes red
ebWaitOnEnvironmentHealth(
    applicationName: "my-application",
    environmentName: "temporary",
    health: "Red",
    stabilityThreshold: 0
)

Changelog

current master

1.44

  • Fix global configuration naming for JCasC. Please note that this is a breaking change if JCasC is defined. This can be fixed by renaming pluginImpl --> pipelineStepsAWS.
  • Fix Elastic Beanstalk client creation bug that ignored provided configurations in the withAWSStep
  • Fix upload tags if file is a directory
  • Add CNAME parameters to Elastic Beanstalk ebSwapEnvironmentCNAMEs command that lookup the required id and name params

1.43

  • Add Elastic Beanstalk steps (ebCreateApplication, ebCreateApplicationVersion, ebCreateConfigurationTemplate, ebCreateEnvironment, ebSwapEnvironmentCNAMEs, ebWaitOnEnvironmentStatus, ebWaitOnEnvironmentHealth)
  • Fix documentation for lambdaVersionCleanup
  • Fix wrong partition detection when assuming role
  • Fix resource listing for lambdaVersionCleanup when using a cloudformation stack with lots of resources
  • Fix issues around S3UploadFile with text string argument
  • Fix cfnExecuteChangeSet to correctly handle no resource change, but updates to outputs (#210)

1.42

1.41

  • Add batching support for cfnUpdateStackSet
  • Retry stack set deployments on LimitExceededException when there are too many StackSet operations occuring.

1.40

  • add registryIds argument to ecrLogin
  • fix CloudFormation CreateChangeSet for a stack with IN_REVIEW state
  • Add lambdaCleanupVersions
  • Add ecrSetRepositoryPolicy

1.39

  • add notificationARNs argument to cfnUpdate and cfnUpdateStackSet
  • Handle Stopped status for CodeDeployment deployments

1.38

  • Add ecrListImages
  • Add ecrDeleteImages
  • Fix instances of TransferManger from aws-sdk were never closed properly
  • add s3DoesObjectExist step

1.37

  • add parent argument to listAWSAccounts
  • Add Xerces dependency to fix #117
  • Add ability to upload a String to an S3 object by adding text option to s3Upload
  • Add redirect location option to s3Upload
  • Add support for SessionToken when using iamMfaToken #170

1.36

  • add jenkinsStackUpdateStatus to stack outputs. Specifies if stack was modified
  • Increase AWS SDK retry count from default (3 retries) to 10 retries
  • Add CAPABILITY_AUTO_EXPAND to Cloudformation Stacks and Stacksets

1.35

  • fixing regression that region was now mandatory on withAWS
  • fix s3Upload step doesn't allow to set object metadata with values containing colon character (#141)

1.34 (use >= 1.35!!)

  • add support for assume role with SAML assertion authentication (#140)

1.33

  • fix timeout settings for cfnExecuteChangeSet (#132)
  • fixed tagsFile parameter being ignored when the tags parameter equals null.
  • fixed error string matching for empty change set in cloudformation
  • automatically derive partition from region (#137)

1.32

  • add paging for listAWSAccounts (#128)
  • retry stackset update on StaleRequestException
  • add support for OperationPreferences in cfnUpdateStackSet

1.31

  • handle throttles from cloudformation stackset operations
  • fixed regression in cfnUpdate

1.30 (use >= 1.31!!)

  • allow the customization of setting a roleSessionName
  • content encoding can be specified in s3Upload step
  • allow configuration of cloudformation stack timeout

1.29

  • fix issues with stack timeouts

1.28

  • use SynchronousNonBlockingStepExecution for long running AWS steps to allow the pipeline step to be aborted
  • use custom polling strategy for cloudformation waiters to speed up pipeline feedback from cloudformation changes
  • add support for tagsFile in cfnUpdate, cfnCreateChangeSet, cfnUpdateStackSet
  • add administratorRoleArn to cfnUpdateStackSet

1.27

  • add rollback configuration to cfnUpdate
  • add enableTerminationProtection to cfnUpdate
  • add retries around cfnUpdateStackSet when stack set is currently busy
  • add s3Copy step
  • allow upload of single files to bucket root

1.26

  • add duration to withAWS
  • add sseAlgorithm to s3Upload
  • add messageAttributes in snsPublish
  • add ability to utilize AWS Credentials Plugin
  • add iamMfaToken to withAWS step

1.25

  • Return ValidateTemplate response on cfnValidate
  • Add s3PresignURL
  • use SynchronousNonBlockingStepExecution for some steps for better error handling
  • allow s3Delete to empty bucket (#63)
  • set minimal Jenkins version to 2.60.3 and switch to Java 8
  • fix cfnExecuteChange step (#67)

1.24

  • Do not fail job on empty change set creation
  • Add support for maps with cloudformation parameters.
  • Allow cfnCreateStackSet, cfnUpdate, cfnCreateChangeSet to take a raw (string) template
  • add ec2ShareAmi step

1.23

  • add updateTrustPolicy step (#48)
  • fix NPE in ProxyConfiguration (#51)
  • fix strange upload behavior when uploading file to path (#53)
  • add support for Stacksets
  • return change set from step

1.22

  • Add kmsId parameter to s3Upload.
  • Fix more characters in RoleSessionName
  • Allow upload of multiple files to bucket root (#41)
  • Use DELETE method for failed stack creation. (Changed behavior)
  • Use Jenkins proxy config when available
  • retrieve all CloudFormation exports (#42)
  • s3Upload returns the S3 URL of the target

1.21

  • Fix: s3Upload did not work in Jenkins 2.102+ (#JENKINS-49025)
  • Fix: RoleSessionName (slashes in buildNumber) in withAWS step for assume role. (#JENKINS-45807)
  • Doc: Clarify usage of metadata

1.20

  • Fix: setAccountAlias broken during code cleanup

1.19 (use >= 1.20!!)

  • Fix: RoleSessionName (decoding job name HTML url encoding) in withAWS step for assume role.
  • Add onFailure option when creating a stack to allow changed behaviour.
  • Add the possibility to define specific content-type for s3Upload step.
  • Support roleArns with paths
  • add setAccountAlias step

1.18

  • Fixed regression added by #27 (#JENKINS-47912)

1.17 (use >= 1.18!!)

  • Add policy for withAWS support - allows an additional policy to be combined with the policy associated with the assumed role.
  • Add cfnCreateChangeSet step
  • Add cfnExecuteChangeSet step
  • Add endpoint-url for withAWS support - allows configuring a non-AWS endpoint for internally-hosted clouds.
  • Add support for String payload and return value in invokeLambda step
  • Support additional S3 options: pathStyleAccessEnabled and payloadSigningEnabled
  • Update AWS SDK to 1.11.221
  • Fix: return value of invokeLambda is now serializable

1.16

  • Add federatedUserId for withAWS support - generates temporary aws credentials for federated user which gets logged in CloudTrail
  • Add return value to awsIdentity step
  • Add ecrLogin step
  • Add invokeLambda step
  • Add cacheControl to s3Uploadstep

1.15

  • Add the following options to S3Upload : workingDir, includePathPattern, excludePathPattern, metadatas and acl

1.14

  • fixes JENKINS-45964: Assuming Role does not work in AWS-China
  • Allow opt out for by-default stack creation with cfnUpdate
  • roleArn parameter support for cfnUpdate
  • Fix: Rendering the paths for S3* steps manually (Windows)
  • fixes JENKINS-46247: Fix credentials scope in withAWS step and add a credentials dropdown
  • add safeName to listAWSAccounts step

1.13

  • Add s3FindFiles step
  • add updateIdP step
  • Fix creation of RoleSessionName
  • Fix bug when missing DescribeStacks permission

1.12

  • Make polling interval for CFN events configurable #JENKINS-45348
  • Add awaitDeploymentCompletion step
  • Add s3Delete step
  • Add listAWSAccounts step

1.11

  • Replace slash in RoleSessionName coming from Job folders

1.10

  • improve S3 download logging #JENKINS-44903
  • change RoleSessionName to include job name and build number
  • add the ability to use a URL in cfnValidate

1.9

  • add support for create stack timeout
  • add the ability to use a URL in cfnUpdate
  • add deployAPI step

1.8

  • add support for externalId for role changes
  • allow path to be null or empty in S3 steps

1.7

  • fix environment for withAWS step
  • add support for recursive S3 upload/download

1.6

  • fix #JENKINS-42415 causing S3 errors on slaves
  • add paramsFile support for cfnUpdate
  • allow the use of Jenkins credentials for AWS access #JENKINS-41261

1.5

  • add cfnExports step
  • add cfnValidate step
  • change how s3Upload works to use the aws client to guess the correct content type for the file.

1.4

  • add empty checks for mandatory strings
  • use latest AWS SDK
  • add support for CloudFormation stack tags

1.3

  • add support for publishing messages to SNS
  • fail step on errors during CloudFormation actions

1.2

  • add proxy support using standard environment variables
  • add cfnDescribe step to fetch stack outputs

1.1

  • fixing invalidation of CloudFront distributions
  • add output of stack creation, updates and deletes
  • Only fetch AWS environment once
  • make long-running steps async

1.0

  • first release containing multiple pipeline steps